• HFC-125
  • HFC-227ea
  • HFC-236fa
  • AFFF
    (Aqueous Film Forming Foam)
  • Wet Chemical for Kitchen Fire
  • HFC-125

    An environmentally preferred substitute
    for Halon 1301 with zero ODP.
    Clean and do not leave residue.
    Electrically nonconductive and
    noncorrosive.
    UL Recognized.

    ▶ Properties

    • Safety as chemically
    • Efficiency extinguishing agent. Zero ODP.
    • Non-toxic, non-flammable liquidate gas
    • Law material of mixing refrigerants

    ▶ Caution

    • Ventilate workspace through air out
    • Seal up the cylinder and keep in well ventilated space
    • There is a danger of explosion if pressurize.
    • Keep the safety regulation of high-pressure gas

    ▶ Application

    • Using cooling system as single refrigerants.
    • Component of mixing refrigerants
    • Efficiency agent in fire extinguishing

    ▶ Physical properties

    Constituent(%, Weight) HFC-125 :100
    Molecular Weight 120
    Boiling Point(1atm ℃) -46.7
    Freezing Point(1atm ℃) -103
    Critical Temperature(℃) 67.7
    Critical Pressure(Mpa) 3.39
    529
    1189.7
    GWP 3450
    ODP 0
  • HFC-227ea

    An environmentally preferred substitute
    for Halon 1301 with zero ODP.
    Safe for people and animal.
    Clean and do not leave residue.
    Electrically nonconductive and
    noncorrosive.
    UL Recognized and FM Approved

    ▶ Properties

    • Colorless and transparent. Liquefied filling in pressurized cylinder
    • Propellant for fire extinguisher
    • Non-flammable, inert, inexplosive and low-toxic
    • Efficiency extinguishing agent. Zero ODP
    • Noncorrosive

    ▶ Caution

    • Exposure latitude : 1000ppm
    • Keep away heater
    • Prevent a damage of valve
    • Keep the safety regulation of high-pressure gas

    ▶ Application

    • Substitute for Halon 1301
    • Fire extinguisher agent
    • Refrigerants and aerosol or foaming agent

    ▶ Physical properties

    Constituent(%, Weight) HFC-227ea : 100
    Molecular Weight 170.03
    Boiling Point(1atm ℃) -16.34
    Freezing Point(1atm ℃) -131
    Critical Temperature(℃) 101.75
    Critical Pressure(Mpa) 2.925
    594.25
    1387.7
    Specific Heat
    (25℃ liquid,cal/g-℃)
    1.1816
    Evaporate Latent Heat
    (cal/g-℃, 1atm)
    131.77
    Viscosity(25℃ liquid,cP) 0.239
    GWP 3220
    ODP 0
  • HFC-236fa

    An environmentally preferred substitute
    for Halon 1211 with zero ODP.
    Safe for people and animal.
    Clean and do not leave residue.
    Electrically nonconductive and
    noncorrosive.
    UL Recognized

    ▶ Properties

    • Colorless and transparent. Liquefied filling in pressurized cylinder
    • Propellant for fire extinguisher
    • Non-flammable, non toxic
    • There is compatibility about other materials and oil

    ▶ Caution

    • Keep shady and well ventilated pace
    • Prevent a damage of valve
    • There is a danger of explosion if pressurize.
    • Keep the safety regulation of high-pressure gas

    ▶ Application

    • Fire extinguisher agent
    • Refrigerants and aerosol or foaming agent
    • Insulating medium or foaming agent

    ▶ Physical properties

    Constituent(%, Weight) HFC-236fa : 100
    Molecular Weight 152.05
    Boiling Point(1atm ℃) -1.4
    Freezing Point(1atm ℃) -103
    Critical Temperature(℃) 124.9
    Critical Pressure(Mpa) 3.2
    555.3
    1360
    Specific Heat
    (25℃ liquid,cal/g-℃)
    1.21
    Surface Tension
    (25℃ liquid,dyne/cm)
    10.07
    Evaporate Latent Heat
    (cal/g-℃, 1atm)
    160
    Viscosity(25℃ liquid,cP) 0.28
    GWP 9810
    ODP 0
  • AFFF
    (Aqueous Film Forming Foam)

    Environmentally Responsible FireFilm® foam concentrate is a superior quality aqueous film forming foam (AFFF) which is used at 1%,2%,3% and 6% concentration to extinguish fires in hydrocarbon fuels.
    This new formulation demonstrates SKFF commitment to superior flexibility, firefighting performance and environmental responsibility.

  • Wet Chemical for Kitchen Fire

    FireFilm®-KF Solution is a high-performance liquid specifically intended for fires of cooking fat and cooking oil.
    This type of liquid is frequently referred to as a “Wet Chemical”.
    A particular application of FireFilm®-KF is the control and extinction of fire in deep-fat fryers.